Does anyone have aftermarket wheels on their car that are black/dark with a polished lip...
I searched through the forum but came up empty.
I'd really like to find a set in stock sizes that fit the car.

 

Your best bet is to look for 18" 5/112 bolt pattern all the way around... 7.5" - 8" wide front, 9.5" - 10" wide rear. You'll find alot of styles in that finish... The 19" rears are the ones you'll never find, unless they are custom...

 

Do an EBAY query for 5 X 112. this will bring back several vendors with wheels from $650 bucks all the way up. Several do free shipping for the mainland. I am currently looking at Evo wheels 18*8 and 19*10 black laced center with chrome or polished lip for $1,169. the fronts are 19 lbs and the rear are 23 lbs. Pay close attention to the composition of wheel when you order. Cast will weigh a lot more than forged and may effect performance of the vehicle.

Lastly, Boyd Billet Wheels will custom drill and offset your wheels at no extra charge so you could be creative and go with something that has a little "poke" for that ultimate euro look.

G/L!!

~ Jess

 

I found one by ACE...it would be 18x8.5 all the way around (would 8.5 fit the front??)


Another one by Voxx, I could do 18x8 and 19x8 (smaller than stock in the back )...

 

Good Photoshop job... I don't think 18x8.5" will work on the front, and definitely too narrow for the rear... IMO

Ideally, I would go with 18x8 front 18x10 rear... I might even experiment with 17" front...

 

Go to lesschwab.com - look at page two and page six (i think) page two has a black 350Z with some black rims w/ polished lip - though I didn't like their simplicity and they seemed to scream "ricer" to me... on page six is a Mercedes SLR sporting the Stern-ST1's which I'm about to put on my car - classy... They are a better name, and much cheaper!!! Through Les Schwab they run $220 for the fronts and $240 for the rears... Also look up the Stern ST-7's.

 

i'm doing ADR m sports black with the polished lip, i'll have them sometime in the spring after winter! NO copying now people! get your own look. haha. black on black, rims and crossfire with black tint, and carboncreations body kit, or cf styling custom kit.

 

lol. I do have my own look!!! uhhh black on black! lol hey but of course you can't copy my lights!!! anyway... what carboncreations body kit? and what about cf styling??? haven't heard of them having anything for the cross.

 

just pulled em up, they don't have anything on our car.

 

na its the universal kit i'm getting, but CFtype also team prototype is a custom order body kit and hood from them. i already talked to them about the hood it will be about $799 for a custom hood without me having to send them the stock hood. they haven't got back to be on the body kit yet.

 

See if they'll do a lower chin lip and quarter panels for track use... I need a little bit more down force on the front and a bit more aero on the lower sides...

 

hey check out the carboncreations web site. they have a front lip for a universal use. it has the front bumper fasteners and its really good quality my friend has the 350z body.

 

This is what I'm looking for... Notice the front chin lip...

 

yeah it kinda looks like that but diff, this is what it looks like.

 

Ummmm HELLO!!! Where do I buy that chin lip!!!

 

at your local parts store, hum maybe i shouldn't tell... jk carbon-creations.com or your local auto place.

 

hi you can get Ruff rims on ebay in a gunmetal finish. they have a couple different patterns to with 3.5 inch lip.

 

WOW where the heck did that pic of that Crossfire come from!?!?!?

 

It was sent to me by one of the DC engineers that has been helping with the SCCA spec.

 

looks like a one lap of america type car...