need to replace my coolant reservoir anyone have one to sell please contact me 203 733 0903 text

 

NeedsWings Performance Products. Factory Overflow Tank

 

steps.... did you break the fitting off? There is a quick fix if that is what happened??? If not, ignore my post...

 

yup broke the tip off what's the quick fix thanks

 

Search, "coolant overflow tank repair" ,its a quick easy repair.

 

some people have drilled and then tapped threads and screwed in a brass fitting to rebuilt the port. I have seen this done a few times and they have failed long term, usually at an opportune time. it is a short term fix not a long term solution.

 

mine are still working some 6 yrs now.... Just have to do the repair correctly...lol

 

I oped to buy one from Neeedswings Thanks for the in put.

 

First I removed the nipple in the hose and saw a metal tube. I timed the broken nipple on the tank cover removed the metal tube and reinserted in the broken nipple and reinserted the tube into the other side of the nipple then epoxied around the nipple

. Drove the x fire frpm Jax to Orlando and back 400 miles but it developed a small pin hole. so I decided to buy a new one from Needswings.

 

that's fine. you could have went to the hardware and bought a brass fitting that would screw into the plastic with a little epoxy on the threads. less than a dollar and you can now lean on it, bang on it...no more worries about snapping it off again...

 

thanks for all the help I have installed a new reservior now I going to try to repair the old on using the 1/8th npt.
thanks all