cool dual intake design - Mark #2

July 19, 2015

11

1

insulated intake piping and testing Read more »

Overall test set-up and how it looks in my car at this time. Dual throttle bodies now working after 3 years of piddeling around with them. 7/19/2015 YEAH at last.

Overall test set-up and how it looks in my car at this time. Dual throttle bodies now working after 3 years of piddeling around with them. 7/19/2015 YEAH at last.

0 2015/07/19 17:21:10 waldig

Insulated intake pipe ready for installation.

Insulated intake pipe ready for installation.

0 2015/07/19 17:21:10 waldig

sensors mounted on intake pipes, passenger side not insulated , Driver side insulated for testing, with dual throttle bodies

sensors mounted on intake pipes, passenger side not insulated , Driver side insulated for testing, with dual throttle bodies

0 2015/07/19 17:21:10 waldig

Thermal testing of intake pipes with surface mounted sensors.

Thermal testing of intake pipes with surface mounted sensors.

1 2015/07/19 17:21:10 waldig

sitting overnight the temps show readings within 0.1 degree of one another left to right intake manifold

sitting overnight the temps show readings within 0.1 degree of one another left to right intake manifold

0 2015/07/19 17:49:55 waldig

Temp meter with the probes under the aluminum tape spots on manifolds, just before the supercharger inlet throat,

Temp meter with the probes under the aluminum tape spots on manifolds, just before the supercharger inlet throat,

0 2015/07/19 17:49:55 waldig

Raw data of testing TBs in front of radiator

Raw data of testing TBs in front of radiator

0 2015/07/29 03:50:49 waldig

Relocated TBs to allow them to be cool = not pick up underhood heat,

Relocated TBs to allow them to be cool = not pick up underhood heat,

0 2015/07/29 03:50:49 waldig

14 months of work at 67 yrs of age, but its got 12 foot ceilings. Woof WW

14 months of work at 67 yrs of age, but its got 12 foot ceilings. Woof WW

0 2015/07/29 10:11:50 waldig

Revising the intake and adding R6 layer of thermal wrap to the pipes.Going for more as usual. WOODY

Revising the intake and adding R6 layer of thermal wrap to the pipes.Going for more as usual. WOODY

0 2015/08/22 04:31:50 waldig

wot 1-2-3. A/F at 14.7 until power added, tic marks are at 14.7, 11.1, 10.7, and 10.5 at 3rd gear. Can not load file only photos and then have to photo screen, email to account, down load photo, then upload photo to forum gallery.......yawn.

wot 1-2-3. A/F at 14.7 until power added, tic marks are at 14.7, 11.1, 10.7, and 10.5 at 3rd gear. Can not load file only photos and then have to photo screen, email to account, down load photo, then upload photo to forum gallery.......yawn.

0 2015/09/12 05:17:51 waldig