Chrysler 3.5 V6 motor
Join Date: Jan 2008
Location: Long Island, NY
Age: 36
Posts: 2,009
Likes: 0
Received 2 Likes
on
2 Posts
Re: Chrysler 3.5 V6 motor
Originally Posted by thummmper
I found this thread in a google search. I have a 3.5 I installed in my vw vanagon- currently modifying the ecu ccd system. The donor is a 94 vision tsi. it is mid-engined, under the back seat. you can see it come to fruition here: vanagonlhs : Vanagon LHS
I'm not fishing for members or hits- there are just so few people setting the 3.5 in other vehicles that I had to share- even though I just now realized this was posted in 06.--I would like to discuss the electrics with someone besides myself. this is my first narrative scrapbook of the project, if youre interested: TheSamba.com :: View topic - my middie
I get so much disinterest from the automotive electrical community and the dealerships that I hunt for discussions like this one. I am over halfway through this electronic job and it is sorting itsself out nicely as I go. thanks--todd w. carlsbad, ca.
I'm not fishing for members or hits- there are just so few people setting the 3.5 in other vehicles that I had to share- even though I just now realized this was posted in 06.--I would like to discuss the electrics with someone besides myself. this is my first narrative scrapbook of the project, if youre interested: TheSamba.com :: View topic - my middie
I get so much disinterest from the automotive electrical community and the dealerships that I hunt for discussions like this one. I am over halfway through this electronic job and it is sorting itsself out nicely as I go. thanks--todd w. carlsbad, ca.
Re: Chrysler 3.5 V6 motor
I'd think about the new Pentastar V6 which puts out 305hp in the new Challenger.
Allpars old 3.5 engine page;
Chrysler/Dodge 3.5 liter V6 engines
The 3.3ltr (pushrod v6 similar to the 3.5) actually has a little racing pedigree to it being massaged by no other than Shelby for the failed Shelby Can Am Racing Series of '89.
The Shelby Dodge Can-Am race car, with the Shelby race version of the Chrysler 3.3L V6 engine
Allpars old 3.5 engine page;
Chrysler/Dodge 3.5 liter V6 engines
The 3.3ltr (pushrod v6 similar to the 3.5) actually has a little racing pedigree to it being massaged by no other than Shelby for the failed Shelby Can Am Racing Series of '89.
The Shelby Dodge Can-Am race car, with the Shelby race version of the Chrysler 3.3L V6 engine
Re: Chrysler 3.5 V6 motor
I had another van I had put a subaru in and the gearing is way too low and it pissed me off, so I started looking for a 6 cyl I could set midengined. the vw trans isnt durable above 180 hp. I chose the 94 vision because I knew the electronics would be a challenge, and I wanted to learn on an obd1 system before moving into the late nineties. besides, I have bought both vehicles and set the e/t for less than 3k, total.
So, buying a 12k engine with obd2 immobilizers and stuff makes little sense for me. true, this engine has 160k miles on it, it ran beautifully before I dismantled her. she must pass smog again too. my ref has no suprises for me.
march 2012-- I have been back to fullerton college since-- their auto shop is now north in la habra due to construction-- but the $8.25 fee is only for those throwing the dice with a conversion or swap. ahem!
CORRECTION-- the state guys will inspect for free, but you must have a legitimate issue to get them to smog it--a sort of incentive-- not just anyone can go for cheap-
So, buying a 12k engine with obd2 immobilizers and stuff makes little sense for me. true, this engine has 160k miles on it, it ran beautifully before I dismantled her. she must pass smog again too. my ref has no suprises for me.
march 2012-- I have been back to fullerton college since-- their auto shop is now north in la habra due to construction-- but the $8.25 fee is only for those throwing the dice with a conversion or swap. ahem!
CORRECTION-- the state guys will inspect for free, but you must have a legitimate issue to get them to smog it--a sort of incentive-- not just anyone can go for cheap-
Last edited by thummmper; 06-22-2012 at 01:41 PM.
Re: Chrysler 3.5 V6 motor
I also own a prowler, had it since new...
the 3.5 is a nice enough engine, has plenty of power for the weight of the prowler, which is even lighter weight 2,838 lb. than the crossfire.
The stock engine:
* High-output 3.5L V6
* 24-valve SOHC aluminum block
* Sequental multipoint electronic fuel injection
* 60 degree OHC
* 253 horsepower at 6,400 rpms
* 255 pound-feet of torque at 3,950 rpms
Since 'new' I've changed out the muffler to a 'free-flow' prowler-owner-designed one... changed the rear end gears, and did a high-flow K&N air filter install. It moves along nicely, but NOwhere near the SRT6.
JMO.
I know this thread's a bit old... a few months ... but still it's active, so thought I'd throw in my 2c if it helps.
the 3.5 is a nice enough engine, has plenty of power for the weight of the prowler, which is even lighter weight 2,838 lb. than the crossfire.
The stock engine:
* High-output 3.5L V6
* 24-valve SOHC aluminum block
* Sequental multipoint electronic fuel injection
* 60 degree OHC
* 253 horsepower at 6,400 rpms
* 255 pound-feet of torque at 3,950 rpms
Since 'new' I've changed out the muffler to a 'free-flow' prowler-owner-designed one... changed the rear end gears, and did a high-flow K&N air filter install. It moves along nicely, but NOwhere near the SRT6.
JMO.
I know this thread's a bit old... a few months ... but still it's active, so thought I'd throw in my 2c if it helps.
Last edited by GenoTex; 11-21-2010 at 02:01 AM.
Join Date: Aug 2007
Location: Lantana, Republic of Texas
Age: 65
Posts: 3,084
Likes: 0
Received 7 Likes
on
7 Posts
Re: Chrysler 3.5 V6 motor
Originally Posted by acrispy1
I have an '05 Chrysler 300 touring that has a 3.5 it has good pickup i like it.
Re: Chrysler 3.5 V6 motor
this is why I am dipping my toes in this direction. I like the innovation at chrysler. My girlfriend had a prowler and it drove very nice, although it rode like a tbucket roadster in the front. what innovation...aluminum frame and all--truly a dream-drawing board car. the pentastar is pretty amazing, and that mbz is using a variation of it speaks volumes. thank god chrysler never made a suburban.
Re: Chrysler 3.5 V6 motor
Originally Posted by thummmper
this is why I am dipping my toes in this direction. I like the innovation at chrysler. My girlfriend had a prowler and it drove very nice, although it rode like a tbucket roadster in the front. what innovation...aluminum frame and all--truly a dream-drawing board car. the pentastar is pretty amazing, and that mbz is using a variation of it speaks volumes. thank god chrysler never made a suburban.
Re: Chrysler 3.5 V6 motor
The 3.5 v6 that came in the late 90's LHS cars are TOUGH motors. Easy to find, full motors can be had for $450. It wouldn't take much to churn out 300+ whp all motor on pump gas. But stand alone management would be a must. I say go for it! X-fire would actually be a chrysler
Re: Chrysler 3.5 V6 motor
I started cutting the harnass today. removed the keyless remote
the 3rd body module plug, the airbag module, the sun sensor.
the collision sensors and the front abs wheel sensors. the 3rd black body module plug had most of the alarm wires, which will not be needed with the new base modules. todd
the 3rd body module plug, the airbag module, the sun sensor.
the collision sensors and the front abs wheel sensors. the 3rd black body module plug had most of the alarm wires, which will not be needed with the new base modules. todd
Re: Chrysler 3.5 V6 motor
On a side note since your doing what i never had the chance... I'll give you some tips. the 2nd generation 99+ 3.5's used bigger throttlebodies and a better flowing intake manifold. They used a higher lift cams. From what i have been told its possible to use the rods from the older 3.8's to increase the stroke from 81mm to 86.9mm if you wanted to make a 3.8 stroker. Altho i think the first generation used free floating pistons.
Re: Chrysler 3.5 V6 motor
Originally Posted by vpats
Why not Mustang's new V-6 with 300 horsepower? Or if you are loaded, lay your hands on one of VW's W12 engines, many horses. Look it up.
Alan
Re: Chrysler 3.5 V6 motor
I am very satisfied with my present choice. It has taken a lot to get to this point, with the research and all.
does ford have a transaxle yet? matched? this is a smoggable app/ california.
they require a matched engine and transaxle. no mixing. not anymore. this is a kit I will mass produce next year. I need an executive order from california for it to be approved and marketable. I liked the windstar engine, but no t/axle. I didnt want some lump in the middle of my cargo floor. this tucks under the seat nicely. a sedan configured induction design is lower than a vans. so that was limiting too.
I needed 200-300 hp to make this worth doing. It will evolve.
does ford have a transaxle yet? matched? this is a smoggable app/ california.
they require a matched engine and transaxle. no mixing. not anymore. this is a kit I will mass produce next year. I need an executive order from california for it to be approved and marketable. I liked the windstar engine, but no t/axle. I didnt want some lump in the middle of my cargo floor. this tucks under the seat nicely. a sedan configured induction design is lower than a vans. so that was limiting too.
I needed 200-300 hp to make this worth doing. It will evolve.