I went with the basic screen, illuminated w/ Blue LED's.

Installation was pretty easy, I just make things harder than they have to be, I'm somewhat of a perfectionist. I also added illuminated door sills at the same time, of course those are blue as well.

The install involved removing the back plastic plate (across the entire back), this is done by removing the bracket (metal) on each side then the seat belt plastic section unsnaps from the main section.
Then pull the back wall carpet out, (after removing the plastic holders), might have to loosen the bolts in the bottom of the glove box.
Next you decide how you want to wire it in. I chose tapping into the parking lights hot wire and Ground then I added a hidden switch just in case I want to the LEDS off.
Many options really, I just have a thing for doing it the right way, solder, connecters, shrink wrap, by the book for an engineer.

I think the Wind Screen comes with instructions, mine did not, but it wasn't an issue, I knew how I wanted.

As for more pics, not really, its still stuck in the garage, can't bear to take it out with the snow and "rocks" they use on the roads here in CO.

No noticeable obstruction, even if there was, I would still have it, it's just classy IMHO.

I went with Robert and Stephen, post above, www.dynamicautoconcepts.com

Stephen is really good about calling you, let's you know how things are going/timeframes.

Hope that helps, and yes, you do have a nice color. All the Blue looks great.