OOO Now we are talking
If you want to go full out HDDP is the expert but for little old me.
I am running the following
Koni Shockers
Eibach springs
K &N Filters
Sparco Pro 2000 Seat (you will have to make your own mounts)
Sabelt harness
Potterfield RS Pads with the dust covers removed from the Rotors.
Powerchip built me a 100 Octane ECU
3" exhaust with crossover.
Yokohama A048 Advan 18 x 235 front 18 x 265 rear 33 psi front 34 psi rear.
Rotors are now toast so going to DBA 5000 series or EBC with water cooling , usuing a windscreen washer bottle and nozzles.
Ran four 15 lap races at Winton again yesterday my time (Tuesday holiday) but ended up with NO pedal after race four.
IN for a service with Chysler on Friday, now I have some explaining to do!
Good luck