Well I just got off the phone with Ross @ Dynosaur. Dyno time is at 10am this Saturday morning.

Dyno 1. My car with the stock air assembly

Dyno 2. Stock air assembly with K & N's installed

Dyno 3. BDJ's Racing Cold Air Intake assembly with DEI wrap

We will be giving each set up around 20 mins to cool down while swapping parts. We will do 2-3 runs per setup and about 2-3 minutes between runs. I believe the dyno is a Dyno Jet 1200, with a 1500whp chip in it. It is in ground as well.

Does anybody locally have a NeedsWing or any other intake they want dynoed, I would be more than happy to do it. I know there is not much time from now till then, so it would probably have to be a local. My car has rear cats deleted, resonator deleted, and Ported Throttle Body. NO ECU OR PULLEY.

I would like to keep this thread clean untill the dyno time please. If you woud like to see a special dyno run done, give me the details on it, or if you would like to come out and watch, feel free.

Dynosaur Performance
4551 West Bailey Boswell Rd
Ft Worth Texas 76179
817-614-3740

btw, does our car require anything special on the dyno, like a M3 does?