Any Ideas? Aftermarket radio install...
I installed my new radio last night and powered it up and got no sound. So I disconnected everything and started over, same results. I've checked all over the Audio, Video thread info and haven't been able to figure out a solution. I have a Pioneer 880 deck, Scosche VW01B harness and Metra 40-EU10. One thing that I've noticed is that I came up one wire short.
There was no wire for me to connect the ACC wire from the Pioneer deck, so I coupled it with Battery wire from my deck (without this, the deck would not power up). Now both the ACC and Battery wire from my deck are connected to the Ignition wire from the Scosche.
Any ideas? Any kind of help is appreciated.