Thread: Vortec install
View Single Post
Old Feb 27, 2008 | 09:01 AM
  #47 (permalink)  
ShawnQ's Avatar
ShawnQ
Senior Member
Joined: May 2007
Posts: 1,325
Likes: 0
From: Bayou Vista, TX
Default Re: Vortec install

Originally Posted by tylerxfire
i don't know if you read my thread before about turbo zone this place near me he is very convinced he can do a single turbo run like 7 psi 8psi and tune it i just don't know if this guy realizes there is no software. I just don't see how he would do it, he works on vettes an mustangs and other domestics previously owned a shop called z06 shop. I don't know it was just a tempting offer for $4,500 dollars out the door tuned i just wouldn't him to get half way through and realize he can't do the electronics part and all that. and i will look into maxwells thread.
What sonoronos is telling you is that there isn't any electronics involved, just an FMU.

Apparently the stock software will adjust itself well enough to allow an FMU to work.

FMU's are usually band-aids for a lack of fuel, IMHO, but in this case it appears that they will work.

SQ
 
Reply