View Single Post
Old Apr 23, 2008 | 05:07 PM
  #18 (permalink)  
Moparrbust's Avatar
Moparrbust
Senior Member
Joined: Dec 2007
Posts: 1,685
Likes: 3
From: Las Vegas
Default Re: Can't dyno the 6 properly

Originally Posted by spensley
Regarding threads in your sweater - it was a joke - obviously lost on you.
Regarding spinning the front wheel, you obviously didn't do a search regarding this issue - you have to jack the car up before you can spin the wheel - I though this was obvious - obviously not!!!
  1. Before jacking the car up, make sure it has stopped moving.
  2. Ensure the car is in the correct position prior to jacking up (i.e. on the dyno).
  3. Strap the car down.
Let me know if you need any more instructions!!!

I know the sweater thread counting was a joke............maybe I'll put a laughing smiley next time so it doesn't get lost on you.


As far as jacking the car up and putting it on stands and then strapping it down to dyno..............that will NEVER be done on my car. I appreciate your informing me to make sure the car stops moving before jacking it up because I had a hell of a time putting it on stands last time to do the oil change while driving down the street. Silly me.

I need no further instructions from you................but thanks for asking.
 
Reply