Re: Temperature indicator
Thanks for the responses so far. I wanted to go conservative on the first pass. The modification is easily done using the Stant stats as there is a series that fits the housing with minimal changes.
I did not go to 160 because I believe that it may be too cold for the computer, LET Jerry possibly will fill in for me here.
Stant stats ( that I chose ) are listed in their book as follows:
13006 160
13007 170
13008 180
13009 190 all in degrees F.
Since they are physically the same you can pick and choose for your personal choice. I will be doing 2 days of autocrossing and after all the big pieces come back without distress Ill release my approach and photos.
I want to be my own test subject first under full power testing conditions. I will also be able to report on the bigger H/E and LET 181 pulley upgrade as I did them this past weekend along with 4 HID lamps that were also installed during the same Thash.....
Enjoy;
Woody