View Single Post
Old Aug 20, 2008 | 11:59 AM
  #1 (permalink)  
tighed1's Avatar
tighed1
Senior Member
Joined: Aug 2008
Posts: 5,741
Likes: 98
From: Sierra Vista, Arizona
Default New Owner - First Impressions

As I mentioned somewhere in a previous post I went to San Diego and picked up my new (to me) SRT-6.

MY DEAL-
I purchased my SRT6 from eBay Item number: 110277740240. Scot, the previous owner agreed to lower the BIN price and a deal was made! He met me at the airport (in his new Porsche) and we drove to his house to seal the deal.

THE CAR-
You would not believe how clean the car is! You could literally park it on a new car lot and sell it as a 2008 model and nobody would doubt that the car was NEW (minus the 30k on the odometer). NO DUST, NO DIRT ANYWHERE!!!! Even underneath! (Scot has a lift and he showed me the underside. Checkout the eBay pics). So as far as I am concerned I just bought a $45k car for cheap!!

THE DRIVE-
Was looking forward to driving in the mountains as it is always the favorite part of my San Diego trip because of the numerous curves. The mountain portion of the trip in the SRT6 was uneventful and unexciting. Most vehicles I have driven through the same corners the tires are screaming (kids and wife too!) and I have to really concentrate on driving. In the SRT6 I was able to take some of the tightest corners at 100mph without breaking a sweat (and no room inside for screaming people!). Got 21mpg through the mountain portion of the trip.
Last leg of the trip I got 20mpg. Max speed reached was 150mph. Wanted to see the limited 158mph but I was coming up (fast) on slower traffic.

THOUGHTS SO FAR-
I am SO glad I got it! Unfortunately I can see tickets in my future.
Car is a little tight in the leg room department for me (6'1") if the seat could recline a bit more it might be ok, but I'm dealing with it! Need to figure out how to enter and exit the car without using the seat as a support device. I can see the seat getting worn from constantly rubbing against it.

WHAT'S NEXT-
Have ordered the Code 3 pulley and will have my neighbor build me a dual CAI and HE. Other mods will come as I read about them in the forum.
Want to thank the forum members for such an informative site! Looking forward to spending hours at work reading and hopefully contributing to the various posts!
 

Last edited by tighed1; Jun 8, 2009 at 04:03 PM.
Reply