Re: Phenolic Spacers, a different approach
In my posting I showed how I glued the LET gaskets together to allow them to go in as a part so they would not separate. I would hope that since they have no goo on either side they should come out without damage.
It looks like these spacers if they work on the SRT will cause me to pull the tubes out and port the lower surfaces now too. I could tell the difference in a good way when I did that to the stock intake manifolds and the inlet side of the tubes.
And I was thinking I done it all for this year so that I could get back to R/C planes again before winter. POO.
Good info, let us know if and when and how much, possibly with the 4 upper intake gaskets as an option.
WOODY ENJOY