Thread: DIY Performance Intake (Like Code 3's)
View Single Post
Old Dec 25, 2008 | 04:05 PM
  #43 (permalink)  
texas t's Avatar
texas t
Senior Member
Joined: Oct 2008
Posts: 2,010
Likes: 0
From: wills point tx
Default Re: DIY Performance Intake (Like Code 3's)
Hey guy I did the diy code 3 cai about a month ago. Today i took some temp of air entering thur code 3 mod. With 65 degree odat at 60 mph crusing was reading 80 at c3 intake ,and 85 in oem intake hose. So i found when using the c3 diy mod the oem intake hoses are for the most part not being used to supply air to engine the c3 cancels out the oem. Sounds very good , But what effect on performance . Also when idling in traffic 64 0dat 186 at c3 and 119 at oem hose. Tomorrow i am going to seal c3 mod and take more readings . I bet that air entering sc will be very close to odat.
 
Reply
0