Thread: Tensioner pulley
View Single Post
  #17 (permalink)  
Old 07-21-2009 | 12:13 AM
tighed1's Avatar
tighed1
Senior Member
Joined: Aug 2008
Posts: 5,714
Likes: 74
From: Sierra Vista, Arizona
Default Re: Tensioner pulley
Originally Posted by tighed1
...I use a 15mm combination box wrench (with another wrench for leverage) on the outer nut that the E11 goes into.

I'll post pics to help explain this later if it will help. Now leave that E11 alone!
Ok, here's what I was talking about. 15mm wrench (on the right) with another wrench interlocked to provide leverage.



Here's a picture of the wrenches mounted, ready for action.
Works perfect! Just enough play to loosen the belt up.

 
Reply Like