Thread: EC tune results over existing other tune
View Single Post
Old Aug 24, 2009 | 08:40 PM
  #27 (permalink)  
Steve Hellums's Avatar
Steve Hellums
Senior Member
Joined: Oct 2006
Posts: 1,409
Likes: 2
From: INDIANA
Default Re: EC tune results over existing other tune
Originally Posted by BlueStorm
Damn!!! now that's a nice power band look at the TQ platue much better than the cheesy tune posted earlier, nice job RENNTECH And that's how it should look! notice how the HP graph follows a much more linear line than the other tune ,that takes alot of dyno time to perfect each Cell in the ecu map to look that clean.
Reaching max touque in 300 RPM's is probably how I can pull off the 1.7-60' 12.510 @ 111.62 with a lot lower dyno #'s than others running around the same times. But I'm not knocking anybody cars or tunes. But I would like to get it leaned out a little and increase the temp setting to get the timing not to start retarding at such a low temp, I'm sure it is set very consertive.
 
Reply
0