Thread: C32 AMG brakes on SRT6...
View Single Post
Old Sep 28, 2009 | 09:05 PM
  #1 (permalink)  
MikeR's Avatar
MikeR
Senior Member
Joined: Jan 2008
Posts: 5,180
Likes: 13
From: North Plains, OR
Default C32 AMG brakes on SRT6...
I got my C32 calipers and rotors a few weeks ago and started putting them on this past weekend. Here is the rotor mounted and caliper temporarily in place. Note that there is an extra hole in the rotor. That is the factory C32 bolt hole for holding the rotor on the spindle. I had to drill and countersink a new hole in the SRT location.
The calipers are a direct replacement on the SRT. Take off SRT, install C32. I had the rotors turned to clean them up and bought new DiskItalia TK pads which is what I had on the Aero and so it matchs the rears still. The C32 is a 345mm rotor vs the SRT 330mm. The real reason I changed was to get the 4 pot front calipers vs the SRT 2 pot. I will change the rears to the C32 2 pot later. These are on the Aero and I decided to paint the calipers yellow for a nice contrast (and it goes with the Navy colors).




This is what paint looks like drying..........



 
Last edited by MikeR; Oct 1, 2009 at 11:44 AM.
Reply
0