Originally Posted by Scottw60

I have a polish attachment for the drill, that is much smaller than the grinder (less chace of hitting the paint). In any event you need to tape the are well. The drill attachment is a 3M product I got at either Pep Boys or Wal*Mart (I don't remember) in it there is 1000, 2000 and 3000 grit polishing pats as well as a polishing compound. but you need to keep the grit wet, DOT NOT HIT IT WITH THE STEEL WOOL!

For the final pass you can use the PlatX or I used the laquer from the Chrysler kit.