The back is a hair higher than the front, but only a hair. (front is still on Eibachs with dot 5 pads) I only drove to the supermarket after finishing. (Thats where I took the picture) As I was driving down the street going over the potholes I was reminded of how it rode stock. So, it rides like a stock SRT, is 1 3/4" lower in the back with the dot 3 spring pads. The front springs may have to wait until the weekend. I hope I didn't cut the front ones too much. I would suggest cutting only 3/4 coil on the rear.
As far as the handling, it's really hard to tell. I usually wait until I'm at the track to push to the limit or past it. I prefer a timed event so the determination is the clock and not my ***.

Les