View Single Post
Old Oct 15, 2010 | 03:07 PM
  #3 (permalink)  
Thirteendog's Avatar
Thirteendog
Senior Member
Joined: Jul 2006
Posts: 3,610
Likes: 3
From: Lebanon, Tennessee
Default Re: Tensioner Pulley Question

Originally Posted by onehundred80
You just change the pulley which also is the same as the idler pulley in the stock na and SRT-6 according to this post.
I got that info from this post, which I got from a search of 'tensioner pulley'.
https://www.crossfireforum.org/forum...tml#post306901
I was told that they were the same, but if you look on the illustration #4 is the Idler pulley and #2 is the tensioner assembly/pulley. I have the idler pulley at home and that's the pulley just to the left of the supercharger pulley.



edited for Illustration
 
Reply