#235 (permalink)  
Old 11-16-2010, 04:19 AM
Athol Holloway's Avatar
Athol Holloway
Athol Holloway is offline
Join Date: Sep 2010
Location: Johannesburg
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default re: Sticky Ignition Key Fix for all Crossfires 2004 thru 2006

Originally Posted by drhrsh
A lot has been written on this site about this problem. I was having the problem of the key not turning, and having to try 6 or more times turning the steering wheel, etc. until it finally worked. I also read about others who were finally unable to turn the key at all, requiring a tow to the dealer and a bill for $1500.00 or more to fix. I want to thank Crossbow 39 for his nice thread on how to do this. I am a visual guy and thought I would take pictures and post a thread to help others. I also learned a few tips which may help others.

1.) Disconnect the negative battery terminal.

2.) Remove the fuse panel access door to the left of the steering wheel, in the door jam area.

3.) Remove the air vent above the headlight switch. It just pops out.

4.) Remove the lower trim panels. First remove the "U" shaped panel below the steering wheel (one screw). This gives you access to 2 hidden screws which need to be removed.

hi PLEASE HELP if you guys can

i have got the ignition out the vehicle !!!!!! 4 drill bits and a billion little cuts on the hands later.

the problem comes in with the key still does not turn to position 1 for me to remove the assemble. ive tried everything i can think of but to no avail. im lost and desperate and would appreciate any positive comments.

Reliableron - thanks for the help and the smack on the hand. i have read the post by rekcah a few times now and as much as it was a truly brilliant post, it seams as if my problem is now 1 step more involved.

anyone have ideas ? and before the obvious comments come out the nearest locksmith is about 25 miles from me, so take it to a locksmith is not an option as the XF is my only mode of transport.

id welcome any help

Athol