Re: Transmission Fluid
Originally Posted by Thirteendog
Oh I'm sorry. For some reason I seem to think that everyone will know exactly what I mean when I write something. How much does it take? 9 Quarts? Liters?
Go to the SRT-6 workshop manual and start on page 21 - 307.
Then read Tighed1's post. https://www.crossfireforum.org/forum...tml#post455674
From the Shop manual.
Add the following initial quantity of Shell 3403 to transmission:
a. If only the fluid and filter were changed, add 5.0 L (10.6 pts.) of transmission fluid to the transmission.
b. If the transmission was completely overhauled, the torque converter was replaced or drained, and the cooler was flushed, add 7.7 L (16.3 pts.) of transmission fluid to the transmission.
Check the transmission fluid level. (Refer to 21 - TRANSMISSION/TRANSAXLE/AUTOMATIC NAG1/FLUID - STANDARD PROCEDURE), and adjust as required.
Last edited by onehundred80; Dec 8, 2010 at 05:51 PM.