Thread: Cleaning exhaust tips
View Single Post
Old Mar 22, 2011 | 06:38 PM
  #17 (permalink)  
Mike-in-Orange's Avatar
Mike-in-Orange
Senior Member
Joined: Jul 2007
Posts: 2,710
Likes: 6
Default Re: Cleaning exhaust tips
The real key to this, like anything else, is to stay on top of it. A minute of preventive maintenance every time you wash your car is a whole lot easier, and keeps things looking better longer, than doing a major correction after you've let it go to heck in handbasket. Any decent metal polish will do - Meguiar's, Mother's, NevrDull, etc. You shouldn't need a tool like the Mother's Power Ball or Meguiar's DynaCone if you keep up with it.

Originally Posted by cheap ride
I used Seapower Fiberglass Boat Cleaner and Wax applied to one of the small round Mothers polishing ***** chucked in my power drill. It cleans, polishes and applies a coat af wax. I have not had to clean the tips in several months. What little was there the last time came out easily with a paper towel dampened with 409 and vinegar.
If you liked having the wax on there, you'd better apply it again now - that combo of 409 and vinegar took it all off!
 
Reply
0