Thread: Balls Deep
View Single Post
Old Mar 29, 2011 | 01:23 PM
  #83 (permalink)  
onehundred80's Avatar
onehundred80
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 647
From: Ontario
Default Re: ***** Deep
Originally Posted by tunaglove
Ha! Funny nobody brought that up!
Yes, I took about 3mm off the crankshaft mating surface of the hub, I'm confident the pulley is aligned.
I forgot to add that the LET pulleys were made from aluminum and that was a poor feature. Aluminum work hardens and if too thin will break.
 
Reply
0