Thread: LED Bulbs for the Glove Box, Trunk, Dome and License Plate lights
View Single Post
Old Apr 12, 2011 | 07:19 PM
  #25 (permalink)  
MMZ_TimeLord's Avatar
MMZ_TimeLord
Senior Member
Joined: Jun 2006
Posts: 1,945
Likes: 23
From: San Mateo, CA, USA, Earth, Sol, Milkyway
Default Re: LED Bulbs for the Glove Box, Trunk, Dome and License Plate lights
Originally Posted by BoilerUpXFire
I would use either 30 or 32, but I have installed in 5+ different XFs and a few of the newer ones were a little different in the contact points.

A standard 194, everything is listed in the thread.
In THIS thread, they are listed as 36mm... I'd stick with that measurement.
 
Reply
0