View Single Post
Old May 21, 2011 | 07:49 PM
  #1 (permalink)  
MikeR's Avatar
MikeR
Senior Member
Joined: Jan 2008
Posts: 5,180
Likes: 13
From: North Plains, OR
Default NW fuel kit installed...

Well I finally got tired of looking at my NW fuel kit sitting in a box on my work bench so I spent about 5 or y6 hours installing it yesterday and finishing up this morning. I mounted the solenoids, relay and ZATV under the battery tray (no see 'em now) and brought the adjusting valve up in front of the ECU box. Still have to machine a bracket to hold it nicely. Tie wrapped for now.

Here is a short burst run I did coming home from my grandson BD party this afternoon. NO leaning out now!
This only got boost up to 12psi but the throttle position was at 62% and the AFR was between 11.7 - 12.1. I still have to fine tune it, but I am VERY happy.

Hopefully the weather will be good (read 'dry') next Saturday as there is a TnT at Woodburn. My bigger worry will be that I dont break my rear end.... I will be looking to better my 11.9 @ 114....


edit: cleaned up file and added a couple of markers.....
 
Attached Files
File Type: doc
NW fuel kit first run052111.doc (115.0 KB, 23 views)

Last edited by MikeR; May 23, 2011 at 02:33 PM.
Reply