Old Sep 12, 2005 | 09:24 PM
  #4 (permalink)  
Scott_lmtd's Avatar
Scott_lmtd
Joined: Dec 2004
Posts: 164
Likes: 1
From: Orlando and St Pete FL
Default Re: Help with electrical connection for radar and sat radio

I have a roady 2 installed and just put in a Bell RX75 system. Pop the radio out, remove the 2 screws on the trim plate (above the radio slot), pull it off, then take out the screws out of the airbag light/cig lighter, and ash tray, great access use the cig lighter power and ground, works like champ.
 
Reply