I looked around for some instructions as how to do this in this car, found no real help and dived right in.

1) I started the car and popped the hood,

2)popped out check valve on brake booster because of the silicone line.

3) slowly add seafoam to vacuum line, enough to not stall the engine

4) when you get close to 1/3 the seafoam gone, dump a bit in till it stalls or just sputters, then turn it off.

5) replug vacuum check seal. I let it sit for 15-30 min

6) turn on and rev sporatically,

7) enjoy the smoke show!

8) take it for a spirited drive,

9) enjoy!