Thread: Chrysler 3.5 V6 motor
View Single Post
Old Nov 23, 2011 | 07:39 PM
  #151 (permalink)  
thummmper's Avatar
thummmper
Forum Regular
Joined: Nov 2010
Posts: 531
Likes: 0
Default Re: Chrysler 3.5 V6 motor
got the spacerdapters from nevada yesterday and they fit wonderfully. they supplied the cs bolts.
the turnaround was reasonable at 10 days from nevada. I mounted this one and the spacing at 19mm thick is good. I'll know better when I set her down.
 
Last edited by thummmper; Nov 25, 2011 at 11:16 PM.
Reply
0