Old Nov 29, 2011 | 10:56 PM
  #70 (permalink)  
MrMoPar's Avatar
MrMoPar
Forum Regular
Joined: May 2011
Posts: 582
Likes: 6
From: NW Ohio
Default Re: BEGi Crossfire Turbo Kit by Bell Experimental Group

Originally Posted by JHM2K
I think stage 2 would be more than ample for the turbo kids. If we're putting out more power than the stage 2 clutch can handle, the internals of the motor will likely be the next weakest point.

Something tells me stage 3 would be a grabby sumbeech.

For the stock folks, or people with basic intake/exhaust/tune, stage 1 would be best as drivability wouldn't suffer.

I still want hard numbers though.
SPEC is a very good company, stage 3 is very grabby, literally on or off. I had one made for my SRT-4, was a hybrid, one side ceramic, one side composite. Had no problem with 330 hp at the wheels on M&H slicks. Still had decent drivability.