Thread: Boostmonkey mods: SLK32 AMG custom exhaust, Flowmaster Super 40
View Single Post
Old Jan 10, 2012 | 04:36 PM
  #1 (permalink)  
boostmonkey's Avatar
boostmonkey
Forum Regular
Joined: Jan 2011
Posts: 528
Likes: 0
Default Boostmonkey mods: SLK32 AMG custom exhaust, Flowmaster Super 40
I finished my custom exhaust on the SLK32 AMG (SRT6). Here is the video: You'll need computer speakers with a subwoofer to get the whole effect. It is LOUD, which is exactly what I wanted. It is very frustrating sitting beside a car with open headers on the starting line and not being able to hear or feel the engine. Looking back and forth between the tach and the tree is just asking to cut a bad light. I did leave a place to install a glasspack resonator if it ends up being too loud on the street.

Mercedes Benz SLK32 AMG custom exhaust, Flowmaster Super 40 - YouTube

Specs:
  • Flowmaster Super 40 muffler, 3" offset inlet, dual 2.5" outlets
  • Hedman 4" tips (cut short)
  • all 3" mandrel bent tubing
  • Magnaflow 3" Y-pipe
  • factory headers
  • I installed two Flowmaster 3" ball flanges to allow for some misalignment and to give me a couple places to take it apart.
  • I retained the factory ground straps, and most of the factory hanger locations
  • I'm trying the "spark plug non-fouler" rear O2 sensor trick with additional spacers welded on.
I'd try to get a video of it driving, but I need a Wavetrac diff first. That should happen soon hopefully.


 
Reply
0