Well dealing with fever and crap this weekend.. but did do a quick fit up of my 5 dollar investment. Probably will have to 3M tape some support around the V on the nose, might try a heat gun to form a slight v at the middle, but just wanted to get this up to show the fit.. And no screws. "Probably" will put fasteners inside the fender lip to secure. One additional note. These seem to come with and without an additonal flange on the top to secure on the Hondas lower grill opening. If you accept this mission.. get without top flange unless you just want to cut it off. These are normally 40 bucks on Ebay.. guess it was fate that day I searched and found it listed for 5 bucks in error.. and a special thanks to the vendor for honering the screw up!



99-00 Honda Civic EK Type R CTR Front Bumper PU Lip EK9‏