Thread: first problem
View Single Post
Old Jan 13, 2013 | 11:20 AM
  #5 (permalink)  
oledoc2u's Avatar
oledoc2u
Senior Member
Joined: Mar 2008
Posts: 14,599
Likes: 34
From: IN
Default Re: first problem
hopefully you didn't ruin the threads....when it came apart...check the spindle to be sure you are getting far enough onto the spindle to tighten the wheel to correct torque.
 
Last edited by oledoc2u; Jan 13, 2013 at 11:42 AM.
Reply
0