Re: Door Panel Help Please!!
Originally Posted by
SrWilliams
I attached it from the top and pushed down. But when I pull the door handle it does not fully disengage the door. Almost as if there is some slack in the cable. I am getting this in both doors, something that did not happen until I took the panels off. Any suggestions?
When you pull the door release handle do you have a few inches of free play in it before it releases the door?
I am trying to think what it looks like when it is together, I believe the outer cable is stopped from moving while the door handle just pulls the inner wire cable. It has been a while since I did it.
Last edited by onehundred80; Feb 16, 2013 at 10:24 PM.