Old Jul 11, 2013 | 06:30 PM
  #4 (permalink)  
onehundred80's Avatar
onehundred80
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 651
From: Ontario
Default Re: Car Won't Start After Fixing "Sticky Ignition Switch" ! HELP!!!!

Originally Posted by MXQB7
yes I did put the the wire from the back on!
the one thing I couldn't find was were the key hole ring goes.
The cable I mean of course is so small and skinny plug.
but cant remember or cant find the plug in entrance ?
but I would think that for the green light it has right? I don't think It would affect the cars
ignition .
Im very frustrated and just want the car to run...
if its not one thing its the other
That halo ring determines if the car has the correctly chipped key in the ignition.

So to put it simply.

No correct chip in the key in the ignition = no start.
No halo ring signal = no start.
 
Reply