Originally Posted by
pizzaguy
Oh............................. I get it now. At least I THINK I do.
I thought the speaker outputs in the rectangular plug on the Kenwood were unused in this installation. Didn't you use the preamp outputs on the Kenwood to drive the amp? From the amp to the speakers, you'd just use the factory wiring.
Therefore, you'd run separate wires from the tweeters to the speaker outputs in the Kenwood rectangular plug.
Pizza:
I think we need someone like BoilerUp to chime in.... I can talk THEORY here only, I have not tangled with the system and lack PRACTICAL experience. I'm gonna send him a PM right now.
Let's get you some REAL help.
Pizza:
Yu are more on tract than I am, given that i do not know what i am doing and I am getting misleasding info. But I believe you are helping me get this on track.
When I first installed all of the new speakers to the amp I used all of the factory wiring and did not use any of the head unit's preout plugs. I was told it would be better and I would get more power by tying my speakers directly into the amp. So, as it stands right now, none of the wire plugs in the kenwood harness block are being used. Shall I run my tweeter wires directly to those preout plugs (I know I am calling them the wrong name) because they are not being used. If that is the case that would be really easy