Originally Posted by bjames

Looks like the close of another business week, and we haven't heard any B.S. from Begi.
Here is a "cut and Paste" from last year at this time where they were talking powder coating and the pipe height. Not much change in a year, same song:


Sorry about the pics. I’m doing my best to avoid you.
Not quite so, just haven’t stopped to take pictures.

Although I seem to have accomplished much in the last several weeks, I have felt lousy for a variety of reasons. Carpel tunnel has hit me a bit hard on both hands and I hope to finish all the piece making before the doc gets to me.
Has the CrossFire group ever mentioned problems with ground clearance? We are adding one inch to the bottom over about 70% of the wheel base. The low spot is about 1.4 down but is between the front wheels. This latter piece at least goes up when the front wheels do. That makes it less of a problem, except for debris on the road.
Just before we yank all things back apart, I’ll take a bunch of picture. We’ll take more with the pieces back from powder coat. I am generally reluctant to take too many pictures of uncoated tubes as they are a bit unsightly, but keep that in mind when first looking at them.

Regards to all,

Corky
Same song different year..the saga continues