What I do, when I tune may car, is do a few pulls and log the runs using the DashDAQ, and open that log up in the Zeitronix software. I do have my ZT-2 plugged into my DashDAQ, so I log PIDS that way. But you can log directly through the ZT-2, you jus wont get any PIDS from the OBD-II port. I could show you some data if you want to give me a call and connect VIA teamviewer one night. I already put the Crossfire in storage for the winter, so I cannot show any live data. Granted, I store it at my parents house and it is only 20mins away.

I am not sure if you can import data from Torque Pro into the Zeitronix software, but you can send an email to them and ask. Zeitronix customer support is very helpful and quick to respond.