Re: 62mm SRT6 Pulley Available Now
Originally Posted by
RED DOG
Thanks for those photos Dave. Now I can see what might need to be done. Looks like I'll need to find someone with a broken supercharger and just swap out the entire face plate piece with the guts . . . That will also give me an excuse to change the jet oil in there too.
I've got an e-mail in to Rob at Needswings so see what assistance he might be able to offer . . . I should probably e-mail Rudy too and see if he has the parts I need.
Do you know if the electromagnet still works?
That filler over the coils that is missing looks like a paste that was used to fill voids in some heating equipment we built. I have forgot the name though, it was like a steel/epoxy compound. As the surfaces of the mating faces deteriorated the slippage would get worse I'd guess.
If the clutch stays engaged after it has been used once, why do we need a clutch. 
Let's face it weld is cheaper than a new SC.
Last edited by onehundred80; Aug 11, 2014 at 07:50 PM.