Thread: Pulse module NOT sending signal
View Single Post
Old Sep 3, 2014 | 07:10 PM
  #8 (permalink)  
pizzaguy's Avatar
pizzaguy
Administrator
Joined: Jun 2009
Posts: 13,953
Likes: 1,280
From: Fort Worth, Texas
Default Re: Pulse module NOT sending signal
But if the RCM's "Engine control relay" does not send power to the PTCM, then there is no enable from the PTCM to the Pulse module.

Or am I wrong here, 'cause I thought we went down this path before and it was found that no engaging of the starter was traced to a broken solder pad on the RCM's engine control relay circuit.
 
Reply
0