Thanks "Musclefan21" for your information on the removal of the inner door pull. Although I have had 3 Crossfires, I have never needed to do any interior work, so had not been involved in any of the posts involving in the subject. On my recent Crossfire purchase one of the inner parts of one of my door pulls had the silver covering damaged, leaving a few sharp edges. I attempted to cover the COMPLETE door pull with a black carbon fiber wrap, which looked good, BUT as it was difficult to access the outer edges the finish there was a bit NAF. I was not aware it was so simple to remove just the inner section of the door pull. After studying your post *Inner Door Panel Removal" I removed my previous wrap and recovered just the inner half with the same carbon wrap and it turned out a great job, much easier Thanks for your great post with pictures, helped a lot.