View Single Post
Old Apr 2, 2015 | 07:22 AM
  #257 (permalink)  
stevo1384's Avatar
stevo1384
Joined: Mar 2015
Posts: 3
Likes: 0
From: fincastle virginia
Default Re: Crankshaft Position Sensor

Originally Posted by ala_xfire
I'm thinking you have no gas in the tank, or a bad fuel pump / clogged fuel filter.
Test the fuel pressure at the test point on the fuel rail right as you switch on the key.
If you don't see 50-60 lbs of pressure, start replacing stuff.
It is plumb full of fuel. I will test for sure. It had pressure in the rail I released it from the valve. But didn't put a gauge on it. IM having it towed to Mercedes to run a diagnostic check on the system today. I will keep you all posted. Thanks for the reply
 
Reply