View Single Post
Old Apr 18, 2015 | 11:33 PM
  #1 (permalink)  
Kanadoos's Avatar
Kanadoos
Joined: Feb 2015
Posts: 9
Likes: 0
From: Langley, B.C.
Default Srt6 suddenly lost all power and stalled

Hi guys,

Been a member here since I bought my used SRT6 a few months back. So to start of my first post I wanted to just say thank you first of all. So far thanks to all the great info here I have fixed the inter cooler pump, crazy fan relay, electric seats not working, central locking not working, etc... I'm sure I'm forgetting some other small issues.

So I've been getting the P0410 code intermittently. Actually I only get it when it rains. But other than the CEL coming on I have not experience any issues related to it.

BUT then today my car totally lost all power and stalled. I managed to pull off the road and park. It would restart but ran really rough. Like the whole car shook. And it would stall as soon I put it in gear.

So I called for a tow truck. Figured without any tools etc I would be better of to get it home and work on it there. The tow truck was 2 hours out. Ten min before the tow truck showed up I tried starting it again and it ran fine. So I called off the tow truck and drove it home really slow. Ran fine all the way home.

But now what could be the issue. No CEL. Starts up fine an runs good. But this car is my daily commuter and I don't trust it to get me to work. By the way it ran when it had the issue I'm guessing there is definitely something going on.

Sorry this is getting very long winded. Could the symptoms I described be the RCM? Obviously I have to address that still. But can that cause the car to run that bad. It still started every try, just ran really really rough. Like it was firing only 3 cylinders.

Thanks guys
 
Reply