Thread: Convertible Top
View Single Post
Old May 24, 2015 | 04:42 PM
  #8 (permalink)  
KDW4Him's Avatar
KDW4Him
Senior Member
Joined: Nov 2011
Posts: 1,287
Likes: 29
From: Alma, MI
Default Re: Convertible Top
Originally Posted by GraphiteGhost
Please be REAL CAREFUL when bypassing switches in such tightly designed areas. One slip, and a ripped top or bent bracket due to something getting caught in something its not supposed to get caught in, and it could get VERY EXPENSIVE. Just saying!
Understood. I will probably check with ohm meter from the PTCM to see if the switches and harness read correctly and if not ground the wire at the connector rather than the switch to see what works.
 
Reply
0