Thread: S.C. - Clutch Plate Pulley Assembly
View Single Post
Old Jan 11, 2016 | 04:11 PM
  #33 (permalink)  
onehundred80's Avatar
onehundred80
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 647
From: Ontario
Default Re: S.C. - Clutch Plate Pulley Assembly
Originally Posted by Fla_Xfire_SRT
We measured the "missing meat" with calipers, its worn as compared to the one that failed.
Was it ever the same thickness as the failed after market one? It maybe just material that was at hand to make the after market one. Wear on this item in use should be minimal, It is not as if the SC connects from a dead stop, it is rotating quite fast when it locks on. My guess is the OEM pulley has been rebuilt with new dog bones, If they have stretched they were not much good to start with.
I base that statement on previous threads I have been on this subject and your posts. I have been wrong once before though if I recall correctly.

 
Reply
0