Thread: supercharger pulley gap?
View Single Post
Old Jan 31, 2016 | 09:38 PM
  #2 (permalink)  
onehundred80's Avatar
onehundred80
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 650
From: Ontario
Default Re: supercharger pulley gap?
Originally Posted by rmcdaniel12
Could anyone be so kind to provide me the info for the "air gap" tolerance betwee. The blower pulley and the clutch? I checked the manual but was unsuccessful in locating such info. Thanks gang.
It is actually the gap between the clutch plate and the magnet. It is .012" to .016" ideally from my notes.
The gap between the clutch plate and the pulley is determined by the stops that the spring pulls the clutch plate back to.
 
Reply
0