Originally Posted by
Roz70
Hello Mackel,
Could you turn to position 1 or was yours stuck at postion 1? Thanks!
Position 0 is horizontal with the Chrysler logo on the fob facing up.
Position 1 is a quarter turn clockwise so that the logo on the fob is facing to the driver's right.
I had no problem moving the key in any direction.
Pay attention to the orientation of the key fob when the key and tumbler come out so you can
put them in the same position to go back in when you're putting it back together.
When you get the key turned to position 1 leave it there. Take the black retainer ring off with the
key in position 1. Do not allow the key to move.