Thread: Valve cover
View Single Post
Old May 22, 2016 | 08:16 AM
  #6 (permalink)  
pizzaguy's Avatar
pizzaguy
Administrator
Joined: Jun 2009
Posts: 13,953
Likes: 1,280
From: Fort Worth, Texas
Default Re: Valve cover
Originally Posted by ala_xfire
Mark means the BIG bolts, NOT the little ones - leave them be !!!!!
Yea:

7) Insert and Tighten the bolts holding the valve covers on to 10 ft-lbs, do not re-tighten the bolts holding the breather covers to the valve covers.


This is one of the FEW times I was not wordy enough.........
 
Reply
0