Thread: How to Repair Relay Control Module (RCM) - (Mystery no Start)
View Single Post
Old Aug 26, 2016 | 06:20 PM
  #1012 (permalink)  
pizzaguy's Avatar
pizzaguy
Administrator
Joined: Jun 2009
Posts: 13,950
Likes: 1,276
From: Fort Worth, Texas
Default Re: How to Repair Relay Control Module (RCM) - (Mystery no Start)
Originally Posted by GoodlawdjeebusitsaFhaur
Thought I would give an update regarding my crossfire. After resoldering the RCM and replacing the pulse module I took it up to the dealership that and they found out that the SKREEM module was bad as well as the ignition. Apparently the latter has to be ordered direct from the manufacturer and needs to be programmed to sync up with a computer. Parts and labor came out to be 2900 in repairs. Thanks for everyone helping me out and trying to keep the cost of repairs down.
As if I was not in a bad enough mood already, here we go with yet another dealer STEALING from a customer. There was nothing wrong with your ignition and the SKREEM only costs around $250. Labor to change it should not exceed $200-$300.
 
Reply
0