View Single Post
Old Feb 26, 2017 | 03:54 PM
  #5 (permalink)  
Mrmiata's Avatar
Mrmiata
Senior Member
Joined: Sep 2011
Posts: 9,595
Likes: 26
From: Kellyville, Ok
Default Re: Rough Idle Post-Cold Air Intake Install

Originally Posted by coryforman


Right side you see the hose clamp is where the new hose starts, goes down to left, you'll see other hose clamp.
How good a seal is that clamp on the throttle body making while riding up on the elbow tube ? Looks to me like it was pushed in too far.. As in clamp the throttle body side "then" insert the elbow?


 

Last edited by Mrmiata; Feb 26, 2017 at 04:01 PM.
Reply